The Flexmike should be paired (registered) to the Topcat in order to function. That there is a solid green link light on the speaker panel of the Topcat. If it does not come on, check that the battery pack can be charged and replace if necessary. That the blue power light on the Flexmike is on. If the Media Connector and/or Flexmike are on and there is still no voice, check that the power is properly connected to the Topcat either by an external power supply or hard-wired into the building’s mains. If it is not blue, turn on the Media Connector or the Flexmike. The power light on the front of the Topcat is glowing blue. There should be a cable connecting the audio output on the audio source to an Audio Input on the Media Connector. The audio cable connections between the audio source and the Media Connector. The audio source volume control (computer, projector, iPod, etc) is adjusted sufficiently.Īdjust volume to approximately the mid-level position.
#Lightspeed topcat registration#
Follow the registration instructions at:Īdjustment on the front panel of the Media Connector.Įnsure the Audio In volume knob is turned to approximately the 12 o’clock position. If the light is not green, the Media Connector is not registered to the Topcat. That the Link light is green on the front of the Media Connector. If all connections are secure, determine if the outlet is working or test with a known working power supply. If not, verify all connections are snug from the power adaptor to the power input of the Media Connector. The Media Connector power is on and the blue light on the front panel is glowing. Symptom Problem Isolation Step Resolution Modified on: Wed, 25 Aug, 2021 at 3:35 PM
0 kommentar(er)
